================================================================================

    Handheld Spectrum Analyzer Software
    FSH View Version 7.1
    Rohde & Schwarz GmbH Muenich, Germany
    Copyright (c) 2004 Rohde & Schwarz
    All Rights Reserved

================================================================================

 This Readme file provides information on product installation,
 last-minute news and where to go for more information.

================================================================================
 Table of Contents
================================================================================

    1.0 Installation
    2.0 New Features
    3.0 Known Problems
    4.0 Minimum Firmware Version of FSH
    5.0 Support

================================================================================
 1.0 Installation
================================================================================

 The installation of FSH View will be started by launching the Setup from
 the AutoRun menu which is offered after inserting the CD-ROM.
 Installation can also be started manually by executing SETUP.EXE from the
     \FSHView\Cdrom  directory.

 The installation can be used under the operating systems 
    Windows 98 / 98SE
    Windows ME
    Windows NT 4.0
    Windows 2000
    Windows XP

================================================================================
 2.0 New Features
================================================================================
New Features in FSH View V 7.0
    Support for FSH6 models.
    Support for new R&S FSH firmware version 7.0 features:
	- Channel Tables editor and control
	- Customized Preset
	- Receiver Measurement
    Added Auto-Save with "Multiple Transfers".
    Added 9600 baud rate.
    Added support Cable Loss.
    Update of cable models.

New Features in FSH View V 6.0
    Support for new R&S FSH3 firmware version 6.0 features.
    Display Line for analysing measurements.
    Selection and view capabilities for Limit Lines are improved.

New Features in FSH View V 5.0
    Support for new R&S FSH3 firmware version 5.0 features.
    Multi Markers for analysing measurements.
    COM5 support.
    The supplied Word Macro ‘FSH Report’ can also read sweeps stored on the 
    PC hard disk.

New Features in FSH View V 4.0
    Support for new R&S FSH3 firmware version 4.0 features.
    The supplied Word Macro ‘FSH Report’ can also read datasets stored on the 
    PC hard disk.
    Added input of relative velocity for cable parameters

New Features in FSH View V 3.0
    Support for the new features in the firmware version 3.0:
	- Vector Calibration Option
     	- Unit Feet with DTF Option
     	- 1dB/div
	- Frequency Offset
	- Unit with Channel Power Measurement
	- Increase of resolution in Power Sensor Measurement

New Features in FSH View V 2.0
    - Added limit line editor.
    - Added transducer factor editor.
    - Datasets from the FSH3 (*.rsd) files can be opened and stored in graphic 
      or test format.
    - A Word Macro for generating Test Reports is part of the software package.

To use the new features "limit line" and "transducer factor" of FSH View software 
version 2.0 the firmware version 2.0 is necessary.

================================================================================
 3.0 Known Problems
================================================================================

 Problem: Tracking Generator Vector trace handling
	The vector traces were incorrectly loaded from .rss files. Application
	crashed on Tracking Generator memory trace. These problems are solved in
	Version 7.0 

 Problem: Power Sensor Reading in SweepWindow
	In FSH View V 3.0 the reading of the Power Sensor in the Sweep Window
	showed always dashes. The right measured value was ignored. This problem
	is solved in Version 4.0

 Problem: Transducer and .csv files
	Some problems occured while reading back csv-exported sweeps transducers
	factor settings. This problem is solved in Version 4.0

 Problem: Regional Settings
	In FSH View V 2.0 problems occurred with some regional settings and the 
	example files. This problem is solved in Version 2.01
 
================================================================================
 4.0 Minimum Firmware Version of FSH
================================================================================

    FSH6:  Firmware V 7.0

    FSH3:  Firmware V 1.1
           Note:
           For firmware versions prior to V 1.1 an appropriate update will be
           available on the Rohde & Schwarz website (see Support).

================================================================================
 5.0 Support
================================================================================

    Rohde & Schwarz Internet Homepage:    www.rohde-schwarz.com

        ROHDE & SCHWARZ Support Center 
        Phone:   +49-180-5124242 (08.00-17.00 CET / Voice Mail) 
        Fax:     +49-89-4129-13777 
        E-Mail:  customersupport@rohde-schwarz.com

================================================================================
 Last Update: June 30, 2004
================================================================================